AUST – Essential Property Services advises that the Building Code of Australia to ensure the protection of occupants in a building using a fire-isolated stairway during a fire, requires the installation of a smoke lobby (known as essential safety measures) between the general floor area of the storey and the exit door to the stair. A smoke lobby would be nominated in the building surveyor‘s essential safety measures determination/ schedule before occupancy occurs.
Building Code of Australia
Part D1 Provision for escape, clause D1.7 Travel via fire isolated exits, specifies when a smoke lobby is required. A smoke lobby must be constructed in accordance with Part D2 Construction of Exits, clause D2.6 Smoke lobbies. A smoke lobby/ smoke lobbies requires its doors to be smoke doors that are either self closing or are fitted with automatic closing facilities linked to the building’s detection system.
The following extract of clause I1.1 Safety Measures covers smoke lobby/ smoke lobbies:
Table I1.1 SAFETY MEASURES – BUILDING FIRE INTEGRITY
|Safety measure||BCA provisions for determining standard of performance|
|Elements required to be non-combustible, provide fire protection, compartmentation or separation||D1.7|
|Smoke doors and associated self-closing, automatic closing and latching mechanisms||D2.6|
Essential Safety Measures Audit
Most building surveyors will nominate smoke lobby/ smoke lobbies and smoke doors as an essential safety measure and will more than likely nominate a 12 month inspection routine (smoke door inspections). The essential safety measures auditor must check the overall integrity of the smoke lobby, this includes walls, doors and ceilings. Any deficiencies noted during an inspection should be recorded in the building’s essential safety measures logbook.
Fire Safety Compliance: Essential Safety Measures